Technical

The AquaVeil^® is brought to you by Tills Innovations Ltd, which has over 20 years’ experience designing and installing fountains and water features for large residential projects and commercial schemes.

Each AquaVeil^® draws on this vast knowledge to incorporate high quality components and equipment, creating a water wall that is both beautifully engineered, and beautiful to look at.

To ensure your AquaVeil^® water wall reaches its full potential, an easy-to-follow operation and maintenance manual is provided upon installation.

Size Considerations

Incredibly the AquaVeil^® can be made to any size in once piece, enabling large water walls to be installed where once it was impossible. The water wall requires a specific minimum size reservoir at the base of the water wall, which varies depending on the size and installation.

The water wall mesh enters the reservoir on the centreline, so you typically have 300mm of reservoir in front and behind the mesh, (depending on AquaVeil height)

The water reservoir is designed so that it can be installed on the ground, within the ground or in-between.

Typical Minimum Reservoir Dimensions:

Depth	600mm from front to back. (depending on AquaVeil height)
Width	250mm wider than the width of the mesh
Height	350mm without automatic water top up
Height	350mm with automatic water top up

The water wall mesh enters the reservoir on the centreline, so you typically have 300mm of reservoir in front and behind the mesh.

The reservoir is designed so that it can be installed on the ground, within the ground or in-between.

Installation

The mesh used for the water wall is flexible, meaning that it can be easily rolled up, transported and moved to its installation point. This has huge benefits for fitting interior water walls into areas where there is limited access.

The AquaVeil^® typically comes complete with all parts required for installation, however, there may be some parts required for your individual fitting that are not included, such as cable joints or fixings specific to your garden landscape design or building.

The water wall comes in component form which enables you to screw and bolt the parts together and easily set up the water feature. The metal mesh for the AquaVeil® is then fitted, the electrical work is completed, and then the feature is filled with water, and turned on.

AquaVeil^® Lighting System

Lighting is a key part of the overall effect of AquaVeil^®. Through an extensive development process, in collaboration with a specialist lighting design studio, the water wall was tested and refined until the perfect bespoke lighting system could be created. The lighting solution enhances both interior water walls and those fitted into gardens.

The system is designed to fit into the top and/or bottom of the water wall, depending on the size and environment of the installation. The high powered, slim line LED lighting system is manufactured in aluminium and powder coated for outdoor installation and comes with a dedicated lighting driver. The lights are IP65 and the driver IP67. The cable length for the lights is tailored to your requirements.

A connection between the light cable and the lighting driver needs to be made when installing on site. The driver requires a 240V ac supply with suitable switching and protection, as provided within the manual.

The Mechanics

The system includes solvent welded pipework and valve control with unions for easy pipe removal. There is a submersible pump with flow control. The pump cables exit the reservoir through a cable gland. The length of cable on the outside of the reservoir depends on the width of the mesh water wall.

The Fixings

The fixings required will depend on the style. For The Enigma™ and the Paradox™, the water wall is generally free standing, but requires structural anchoring at the top. This could be to a wall or the ceiling, depending on location and if its an interior or garden installation.

The Quantum™ style is bespoke and is installed on a project by project basis. The AquaVeil^® team will work with you to ensure the water wall is installed correctly.

Electrical supplies

Depending on the bespoke design, generally there are three electrical supplies required, covering: the water wall pump, the filtration system pump, and the lighting. All require a 240Vac supply and appropriate switching and protection as detailed within the equipment installation manuals, and relevant electrical regulations. The water feature installation should be carried out by a qualified electrician.

It is the most amazing piece I have ever purchased. This is better than what I had expected and really has the WOW factor. I want to thank Mike and Steve for the professional service that they provided throughout.

Ashwin Bedi

The guys were absolutely fantastic throughout the whole process, from initial enquiry right through to coming and fitting! We absolutely love it.

Emma and Paul

From the very first telephone conversation Mike and Steve were super helpful. They quickly understood our requirements, provided helpful advice to complete our design, created clear design & operating documents and worked a small miracle to meet our deadline.

Jen Allsop

The AquaVeil^® has added a wow-factor to my restaurant. The water feature at the Royal Nawaab goes a long way to helping us to achieve that sense of distinctiveness.

Mr Mahboob Hussain

I am very happy with my fountain, it is a focal point of my Court Yard. It is relaxing in its sight and sound, symbolises relief of any life situation. It is clear and salubrious, ever refreshing; In the evenings it is spectacular and fantastic.

Naseem

The look of it provides a fantastic calm feel to the garden, we have it on most evenings as its just lovely to see in the background. Brilliant service from start to finish, absolute perfectionists!

Emma and Paul

It brings a real sense of grandeur to the space as customers are greeted by a towering wall of water. The presence of the AquaVeil^® adds to the overall experience for my customers; it gives them a talking point, something to photograph and share.

Mr Maboob Hussein

The installation was completed on time and the site was left really clean and tidy. First class customer service. We love our water wall, it blends beautifully into our garden and gets compliments from every visitor. Thank you Tills Team!